Metabo KHE56 Combination Hammer



Rotation stop for chiselling
Metabo VibraTech (MVT): integrated damping system to reduce vibrations in order to protect the user’s health
Optional 30% impact reduction setting for working with more pliant materials
Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working with customised speeds for the materials used that remain almost constant under load
Electronic soft start for precise spot-drilling
Optimum heat dissipation and low weight by magnesium die cast gear housing
Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive if the drill jams for safe working
Stoppable switch for trouble-free chiselling in continuous operation
The service display, for example, indicates when the carbon brush needs to be replaced, plus an LED indicating mains voltage

Key Features

Torque 796 in-lbs
– Drill diameter in
– Concrete with hammer drills 1 25/32 ”
– Concrete with core bits 2 9/16 ”
– Concrete with core bits 3 15/16 ”
Idle revolution 0 – 300 /min
Rated input power 1300 W
Output power 650 W
Maximum impact rate 2840 /min
Max. single blow energy (EPTA) 8.5 J
Impact power 402 J/s
Collar diameter 2 19/32 ”
Bit retainer SDS-max
Weight (without power cable) 14.8 lbs
Cable length 6 m