Length (less forks): 238.8 in. (6.06 m)Width: 102 in. (2.59 m)Height: 101.1in. (2.56 m)Wheelbase: 119.5 in. (3.03 m)
Ground Clearance: 18 in. (457 mm)
Outside Turning Radius: 164 in. (4.16 m)
Max. Reach from Front Tires to 24 in. (609 mm) Load Center: 39 ft (11.27 m)
Rated Capacity: 10,000 lb (4,536 kg)
Maximum Lift Height: 53 ft 2 in. (16.2 m)
Frame Leveling: 10˚
Lift Speed (boom retracted)
Up: 15 sec
Down: 11.5 sec
Extend: 15.7 sec
Retract: 15.5 sec
Travel Speed Forward
4-Speed: 20 mph (32 kmph)
Drawbar Pull: 29,570 lb (13,413 kg)
Operating Weight Without Carriage and Forks: 27,323 lb (12,394 kg)
Engine: Make and Model Cummins QSB 4.5T Turbo
No. of Cylinders: 4
Displacement: 274 cu in (4.5 L)
Torque Rating: 305 lb ft (414 Nm) @ 1,500 rpm
Rated Speed: 2,500 rpm
Max. Gross BHP: 110 hp (82 kW)
Fuel Tank: 35 gal (132 L)
Two-stage dry air cleaner — centrifugal precleaner with continuous dust ejector and replaceable dry filter element. Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.
Alternator: 95 amp
Battery: Two batteries, each with 850 cold cranking amps at 0°F
Modulated powershift. 4-speed forward and 3-speed reverse.
Full-time planetary 4-wheel drive.
Oscillating rear axle with Stabil-TRAK™ System.
Hydraulically actuated inboard wet disc brakes.
Emergency brake with transmission declutch feature.
Standard: Air-filled 17.5 x 25 — 12 ply
Optional: 17.5 x 25 Radial; 17.5 x 25 Bias Ply Foam-Filled
Certified ROPS/FOPS structure. Deluxe suspension seat with retractable seat belt. Rear view mirrors.
4-Wheel Power steering. Operator selectable 4-wheel circle, 4-wheel crab, 2-wheel front.
Instrument cluster with gauges and warning lights.
Dual joystick controls. Proportional frame tilt, fork tilt and auxiliary hydraulics.
• Implement Piston pump.
• 60 gal (225 L) system capacity.
• Variable flow, load sensitive hydraulic system.
• Load holding valves on frame level, stabilizer, attachment tilt, extend and lift cylinders.
Axle mounted high clearance outriggers allow frame leveling without changing stance
Used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls and hydraulic lines.