Length (less forks): 225.2 in. (5.72 m)Width: 98.2 in. (2.49 m)Height : 99.4 in. (2.52 m)Wheelbase: 119.5 in. (3.03 m)
Ground Clearance: 17.3 in. (439 mm)
Outside Turning Radius: 156 in. (3.96 m)
Max. Reach from Front Tires to 24 in. (609 mm) Load Center: 26.6 ft (8.10 m)
Rated Capacity: 8,000 lb (3,629 kg)
Maximum Lift Height: 41 ft 11 in. (12.7 m)
Frame Leveling: 10˚
Lift Speed (boom retracted)
Up: 15 sec
Down: 12.5 sec
Extend: 14.5 sec
Retract: 14 sec
Travel Speed Forward
4-Speed Forward: 20 mph (32 kmph)
Drawbar Pull: 24,000 lb (10,886 kg)
Operating Weight Without Carriage and Forks: 25,365 lb (11,506 kg)
Engine: Make and Model Cummins QSB4.5T Turbo
No. of Cylinders: 4
Displacement: 274 cu in (4.5 L)
Torque Rating: 305 lb ft (414 Nm) @ 1,500 rpm
Rated Speed: 2,500 rpm
Max. Gross BHP: 110 hp (82 kW)
Fuel Tank: 35 gal (132 L)
Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector and replaceable dry filter element. Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.
Alternator: 65 amp
Battery: Two batteries, each with 850 cold cranking amps at 0°F
Modulated powershift. 4-speed forward and 3-speed reverse.
Full-time planetary 4-wheel drive. Oscillating rear axle with Stabil-TRAK™ System.
Hydraulically actuated inboard wet disc brakes.
Emergency brake with transmission declutch feature.
Standard: Air-filled 13.00 x 24 — 12 ply
13.00 x 24 foam filled
13.00 x 24 rock air
13.00 x 24 rock foam
15.50 x 25 radial
15.50 x 25 bias air
Certified ROPS/FOPS structure. Deluxe suspension seat with retractable seat belt. Rear view mirrors. Lockable covers.
4-Wheel Power steering. Operator selectable 4-wheel circle, 4-wheel crab, 2-wheel front.
Instrument cluster with gauges and warning lights.
Dual joystick controls. Proportional frame tilt, fork tilt and auxiliary hydraulics.
• Implement Piston pump.
• 60 gal (225 L) system capacity.
• Variable flow, load sensitive hydraulic system.
• Load holding valves on frame level, stabilizer, attachment tilt, extend and lift cylinders.
Used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls, and hydraulic lines.